You have no items in your shopping cart.
Product Description:
Color Kinetics® PDS-60ca 7.5V intelligent, indoor/outdoor, power/data supply is specifically
designed for Color Kinetics 7.5 volt Chromasic® fixtures. PDS-60ca 7.5V provides a robust 62W
power source and a choice of intelligent data interfaces. The available data interfaces condition data
supplied from Ethernet or DMX512 controllers to a format compatible with the fixtures. PDS-60ca
7.5V is also available as a preprogrammed unit. The integration of power and data simplifies wiring
installation, and the selection of control configurations expands the versatility of the PDS-60ca 7.5V.
DMX/Ethernet: The DMX interface is used for installations using a DMX controller
such as an iPlayer 2, ColorDial, or a third party DMX controller. The Ethernet interface is designed to
work with Light System Manager or Video System Manager for large installations.
Preprogrammed: The preprogrammed unit is best suited for installations using
simple effects across all light nodes. The preprogrammed unit controls a maximum of 144 nodes. The
preprogrammed shows are: Chasing Rainbow, Fixed Color, Color Wash, Random Fade, Tile Burst,
and Tile Spiral.
PDS-60ca 7.5V is housed in a compact NEMA 4 (IP66) enclosure designed for use in wet locations
and complies with National Electrical Code (NEC) requirements. Each PDS-60ca 7.5V features
multiple standard conduit entries sized for 1/2-inch (15.8 mm) and 3/4-inch (20.9 mm) trade sized
conduit. The data drive circuitry has been specifically designed with short circuit protection to prevent
failures due to incorrect wiring.
PDS-60ca 7.5V automatically accommodates supply voltages ranging from 100VAC to 240VAC,
which must be hard-wired to the supply. Color Kinetics 7.5V Chromasic fixtures are pre-attached connectors for easy fixture connection to output terminals. RJ45 data input accepts data from Ethernet or
DMX Cat 5 data cables. If you use the DMX interface on the DMX/Ethernet power/data supply or if
you use the Preprogrammed power/data supply, the data output connectors let you daisy-chain DMX
data to other DMX supplies.
PDS -60ca 7.5V Specifications:
Power Output: 7.5VDC, 62W
Power Input: 100VAC-240VAC (auto ranging), 50Hz–60Hz; 1.7A
Power factor correction (PFC)
Heat Dissipation: 25 percent of total power output
Ambient Operating Temp: 14°F to 104°F (-10°C to 40°C)
Housing: NEMA 4 enclosure
Dimensions: 8.8" (22.4 cm) x 5.5" (14 cm) x 3.6" (9 cm)
Weight: 4.5 lbs. (2 kg)
Connectors Data: RJ45 input and output connectors
Power: 4-pin output connectors
Data input DMX: Color Kinetics DMX controllers or DMX512 compatible
Ethernet: Color Kinetics Light System Manager or Video System Manager
Preprogrammed: No external data input
Data Output: Chromasic 7.5V
Protection Rating: IP66
Fused Protection: Two 4amp, 3AG fuses
Classification: Class 2
Listings: UL/cUL, CE, PSE
designed for Color Kinetics 7.5 volt Chromasic® fixtures. PDS-60ca 7.5V provides a robust 62W
power source and a choice of intelligent data interfaces. The available data interfaces condition data
supplied from Ethernet or DMX512 controllers to a format compatible with the fixtures. PDS-60ca
7.5V is also available as a preprogrammed unit. The integration of power and data simplifies wiring
installation, and the selection of control configurations expands the versatility of the PDS-60ca 7.5V.
DMX/Ethernet: The DMX interface is used for installations using a DMX controller
such as an iPlayer 2, ColorDial, or a third party DMX controller. The Ethernet interface is designed to
work with Light System Manager or Video System Manager for large installations.
Preprogrammed: The preprogrammed unit is best suited for installations using
simple effects across all light nodes. The preprogrammed unit controls a maximum of 144 nodes. The
preprogrammed shows are: Chasing Rainbow, Fixed Color, Color Wash, Random Fade, Tile Burst,
and Tile Spiral.
PDS-60ca 7.5V is housed in a compact NEMA 4 (IP66) enclosure designed for use in wet locations
and complies with National Electrical Code (NEC) requirements. Each PDS-60ca 7.5V features
multiple standard conduit entries sized for 1/2-inch (15.8 mm) and 3/4-inch (20.9 mm) trade sized
conduit. The data drive circuitry has been specifically designed with short circuit protection to prevent
failures due to incorrect wiring.
PDS-60ca 7.5V automatically accommodates supply voltages ranging from 100VAC to 240VAC,
which must be hard-wired to the supply. Color Kinetics 7.5V Chromasic fixtures are pre-attached connectors for easy fixture connection to output terminals. RJ45 data input accepts data from Ethernet or
DMX Cat 5 data cables. If you use the DMX interface on the DMX/Ethernet power/data supply or if
you use the Preprogrammed power/data supply, the data output connectors let you daisy-chain DMX
data to other DMX supplies.
PDS -60ca 7.5V Specifications:
Power Output: 7.5VDC, 62W
Power Input: 100VAC-240VAC (auto ranging), 50Hz–60Hz; 1.7A
Power factor correction (PFC)
Heat Dissipation: 25 percent of total power output
Ambient Operating Temp: 14°F to 104°F (-10°C to 40°C)
Housing: NEMA 4 enclosure
Dimensions: 8.8" (22.4 cm) x 5.5" (14 cm) x 3.6" (9 cm)
Weight: 4.5 lbs. (2 kg)
Connectors Data: RJ45 input and output connectors
Power: 4-pin output connectors
Data input DMX: Color Kinetics DMX controllers or DMX512 compatible
Ethernet: Color Kinetics Light System Manager or Video System Manager
Preprogrammed: No external data input
Data Output: Chromasic 7.5V
Protection Rating: IP66
Fused Protection: Two 4amp, 3AG fuses
Classification: Class 2
Listings: UL/cUL, CE, PSE
Additional Information:
| Brand | Color Kinetics |
Need More Info?
Call (954) 927-6690 to speak with a Laser & Light Customer Service Rep about the PDS-60ca 7.5V Power Supply - RGB. Or You Can Visit the Manufacturer's Website for More Information.