The ColorBurst® 6 fixture is a Chromacore®-powered product designed to meet the needs of lighting professionals, providing them with a small, sleek solution for spotlighting and wall-washing with rich, saturated colors and color-changing effects.
Projecting a soft-edge beam of light, ColorBurst 6 is a sealed product designed for both indoor and outdoor installations. The fixture is fully enclosed in a stylish and rugged die-cast aluminum housing and meets or exceeds specifications for use in wet locations. Enclosed wiring gives ColorBurst 6 a neat appearance and optimum positioning. The housing is equipped with a three-screw accessory ring to affix spread lenses, louvers, and other attachments and is available in either a black or white finish to match its environment and prevent oxidation. ColorBurst 6 has three 18AWG wire leads and attaches to a standard junction box or an optional mounting base, which has a 60-foot (18.3 m) three-conductor cable. The 350° locking base swivel, with 350˚ locking fixture rotation, offers a versatile range of light positioning.
ColorBurst 6 can be controlled by a Color Kinetics® controller or a third-party controller. Each fixture comes pre-addressed to light number one. With a Color Kinetics controller, simple effects, such as fixed color and color wash, require no additional addressing. Other effects across multiple lights, including Chasing Rainbow or Color Sweep, require further addressing using one of the following Color Kinetics addressing tools: Serialized Addressing Software (SAS) or Zapi. For protection from extreme temperatures, ColorBurst 6 has been designed with a temperature monitoring feature. If operating temperatures rise to an unsafe level, a compensation circuit is triggered and ColorBurst 6 operation is interrupted causing the light to turn dull red. After 30 minutes the light will auto-cycle and return to full intensity.

Specifications:

Color Range 16.7 million (24 bit) additive RGB colors; continuously variable intensity
Output Range:
Source: High intensity power light emitting diodes (LEDs)
Beam Angle: 12° clear lens, 22° ground lens
Housing: Die cast aluminum in black or white
Listings: UL/cUL Listed
Data Interface: Color Kinetics data interface system
Control: Color Kinetics full line of controllers or DMX512 (RS485) compatible when using Color Kinetics power/data supply
Power Requirement: 24VDC
Power Consumption: 25W Max. at full intensity (full RGB)
Power Supply: PDS-150e (ITEM# 109-000008-01) - Maximum of 6 fixtures/supply
PDS-60 24V (ITEM# 109-000017-00/03) - Maximum of 2 fixtures/supply

Protection Rating: IP66